NEWS

Doing product excellence, Customer sincerity and sincerity

Five precautions for crusher installation


Time:

2019-01-25

Installation and commissioning are necessary for customers after purchasing the crusher. In order to ensure smooth production and unnecessary maintenance costs in the future, strict compliance with the installation process specifications can allow the production line to be put into production smoothly, and avoid improper installation or failure to comply with installation precautions. For unnecessary maintenance costs caused, the following summarizes the five conventional precautions in the process of installing the crusher.

 

Installation and commissioning are necessary for customers after purchasing the crusher. In order to ensure smooth production and unnecessary maintenance costs in the future, strict compliance with the installation process specifications can allow the production line to be put into production smoothly, and avoid improper installation or failure to comply with installation precautions. For unnecessary maintenance costs caused, the following summarizes the five conventional precautions in the process of installing the crusher.

1. The main engine of the crusher equipment is fixed firmly on the basis of laying the concrete level with anchor bolts, which is more conducive to the crushing efficiency and use function of the crusher, and greatly reduces the safety problems of the crusher during the crushing process.

2. Pay attention to the balance between the main body and the ground during installation, so that in the production of the machine, the hammer head can more effectively break the stone during operation, and the strength is balanced, which is more conducive to the mutual wear of the crusher due to the unbalanced wear and tear. Safer increases the life of the crusher.

3. The installed equipment should be checked whether it is firmly fixed, whether the bolts in various parts are loose, whether the main warehouse door of the main engine is fastened, whether the main shaft of the machine can operate normally, whether the lubricating oil is filled, etc. Unreasonable places should be dealt with in time.

4. The installed crusher should be equipped with a power cord. It must be equipped in accordance with the requirements of the manual and the rated power equipment of the equipment, as well as the safety of the control switch to ensure whether it is normally powered on and the safety of the power supply.

5. After completing these inspections, test the machine, first turn on the switch to see if the crusher can operate normally to ensure that there is no problem, and then put in the material for further operation. If there is no problem, the last step is to carry out the load test of the crusher, and the operation can be carried out normally after the test machine is completed.